Xtreme Clean Full Cleaning and Protection Kit 4

Product code: CXL-KIT4
£65.30
Out of stock
Currently sold out
You will earn 65 points with this purchase
Xtreme Clean Full Cleaning and Protection Kit 4

Kit Includes

Xtreme Clean 500ml
Spray Bottle and Trigger Head
Wheel Brush
1 pair Nitrile Gloves
WheelX 250ml
2 x Foam Applicator Pad
2 x Microfibre Cloth 40x40cm
Protex 250ml
1 Set (3pcs) Woolie Wheel Brushes

XtremeClean 500ml Cleaner / Degreaser

Xtreme Clean is an all-purpose, water soluble, biodegradable, non-flammable, non-corrosive, non-toxic, heavy duty cleaning concentrate and degreaser for jobs of all kinds. Non-corrosive and earth-friendly, Xtreme Clean is the environmentally-friendly way to keep your equipment squeeky clean!

Xtreme Clean is safe to use on all painted surfaces, metals, stone and concrete, electrical insulation and plastic surfaces.

WheelX Wheel Sealant 250ml

WheelX is a high-tech polymer sealant for your cars wheels (can also be used on your plane or boat!) thats easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. It can also be applied to windscreens (and other windows) to repel rain.

NOTHING STICKS BUT THE SHINE!®

WheelX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.

APPLICATION

WheelX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it wont perform up to its potential. WheelX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 12 hours.

Curing is required to allow the monomers (polymer building blocks) that make up WheelX to attach to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film. It is very important to allow WheelX to cure for 12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. before it has cured, the contaminants may interfere with the film, preventing the WheelX from achieving its maximum performance and durability.

WheelX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES

WheelX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. It can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. WheelX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish.

WheelX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly.There is no reason to wax over WheelX. As weve already said, WheelX leaves a shinier, longer-lasting finish than wax and the wax cant adhere well to WheelX!

If a WheelX-treated surface needs repainting, normal paint preparation is all thats required. Abrasive cleaners, polishes, rubbing compounds or chemical paint strippers will remove the WheelX film.

WheelX - INSTRUCTIONS FOR USE

Shake well and apply to a clean, dry surface that is cool to the touch. Do not apply in direct sunlight or in temperatures greater than 85° F.

After WheelX dries to a haze (about 20 minutes), simply wipe it off. Unlike waxes that require strenuous rubbing or buffing to remove, WheelX easily wipes on and off.

Allow to cure for 12 hours out of the elements.

For optimum protection, reapply every 4-6 months as needed.

ProteX 250ml Paint Sealant

ProteX is a high-tech polymer sealant for your car, plane or boat thats easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. It can also be applied to windscreens (and other windows) to repel rain.

NOTHING STICKS BUT THE SHINE!®

ProteX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.

APPLICATION

ProteX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it wont perform up to its potential. ProteX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 12 hours.

Curing is required to allow the monomers (polymer building blocks) that make up ProteX to attach to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film. It is very important to allow ProteX to cure for 12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. before it has cured, the contaminants may interfere with the film, preventing the ProteX from achieving its maximum performance and durability.

ProteX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES

ProteX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. It can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. ProteX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish.

ProteX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly.There is no reason to wax over ProteX. As weve already said, ProteX leaves a shinier, longer-lasting finish than wax and the wax cant adhere well to ProteX!

If a ProteX-treated surface needs repainting, normal paint preparation is all thats required. Abrasive cleaners, polishes, rubbing compounds or chemical paint strippers will remove the ProteX film.

ProteX - INSTRUCTIONS FOR USE

Shake well and apply to a clean, dry surface that is cool to the touch. Do not apply in direct sunlight or in temperatures greater than 85° F.

After ProteX dries to a haze (about 20 minutes), simply wipe it off. Unlike waxes that require strenuous rubbing or buffing to remove, ProteX easily wipes on and off.

Allow to cure for 12 hours out of the elements.

For optimum protection, reapply every 4-6 months as needed.

Own this product? Let us know what you think.
Brand CorrosionX
Code CXL-KIT4
Condition New
Weight 2.1kg
MPN CXL-KIT4
Brand CorrosionX
Size 1 piece